I can now order a few parts that I need.

"Dieter Wiedmann" <Dieter.Wiedm…@t-online.de> wrote in message

news:3FDC2E8C.979B4F81@t-online.de…

- Hide quoted text — Show quoted text -

> Claudio Incrocci schrieb:

> > Where can I get a BSS97 without
> > having to order high quantity?

> Well, here in Germany its no problem, Segor (www.segor.de) still has
> them in stock (EUR 1.00 incl. 16%VAT). Have a look on their
> international order conditions:
> http://www.segor.de/L1Versand/internate.shtml

> Regards,
> Dieter

"Chaos Master" <please….@ibestvip.com.br> wrote in message

news:MPG.1a4589509b5fd2b1989841@news.cis.dfn.de…

- Hide quoted text — Show quoted text -

> Claudio Incrocci(incro…@shaw.ca) spoke, er, wrote:
> > Hello,

> >   Does anyone have an old data book?  I need the data sheet on a BSS97
power
> > mosfet.  I want to know what I can substitute in its place.  There is
> > another power mosfet that has one pin attached to the BSS97, it is a
BUZ32.
> > I am trying to find out the characteristics on power mosfets and
determine
> > how significant the RDS is and what value is better, is lower resistance
> > better.  There is no schematic diagram available for this board and it
works
> > like a camera flash unit.

> I would look at the Philips and  Fairchild (sp?) web-sites. I would check
it for
> you, if my connection was a bit faster. Sorry

> BTW, try NTE, at least you (hopefully) may be able to get a pinout and the
data
> such as Rds[on] and other parameters.

> —

> Where can I get a BSS97 without
> having to order high quantity?

Well, here in Germany its no problem, Segor (www.segor.de) still has
them in stock (EUR 1.00 incl. 16%VAT). Have a look on their
international order conditions:
http://www.segor.de/L1Versand/internate.shtml

Regards,
Dieter

    Thank you for the data on the BSS97.  The pin configuration is the
opposite of the BUZ32.  Where did you get the Data on the BSS97?  Testing
the both BUZ32 (out of circuit), it appears to be ok but both  BSS97 are not
responding the same way.  So I am suspecting the BSS97 to be the problem but
would need a new one to test and make sure.  Where can I get a BSS97 without
having to order high quantity?

 I have two boards and one of the BUZ32 power mosfets is in backwards.  The
outside pins of both BSS97 and BUZ32 are connected, it might make a
difference since the BSS97 pins are  opposite of the BUZ32.  I have been
searching the whole internet and could only find a Spanish site that had it
as 100v, 1.5a, 10w 2RDS.  I thought that the pins would be the same on both
but apparently they are not.  Do you know how important the RDS is and how I
would substitute, would a lower rds be better?

Thanks again
Claudio

"Dieter Wiedmann" <Dieter.Wiedm…@t-online.de> wrote in message

news:3FDB97EF.EC30FE47@t-online.de…

- Hide quoted text — Show quoted text -

> Claudio Incrocci schrieb:

> > Hello,

> >   Does anyone have an old data book?  I need the data sheet on a BSS97
power
> > mosfet.  I want to know what I can substitute in its place.

> BSS97: N-MOSFET, 200V, 1.5A, 10W, Rds(on)<2R, source:left, drain:mid,
> gate:right.

> Regards,
> Dieter

> Hello,

>   Does anyone have an old data book?  I need the data sheet on a BSS97 power
> mosfet.  I want to know what I can substitute in its place.

BSS97: N-MOSFET, 200V, 1.5A, 10W, Rds(on)<2R, source:left, drain:mid,
gate:right.

Regards,
Dieter

> another power mosfet that has one pin attached to the BSS97, it is a BUZ32.

http://www.infineon.com/cmc_upload/migrated_files/document_files/Data...

Regards,
Dieter

> Hello,

>   Does anyone have an old data book?  I need the data sheet on a BSS97 power
> mosfet.  I want to know what I can substitute in its place.  There is
> another power mosfet that has one pin attached to the BSS97, it is a BUZ32.
> I am trying to find out the characteristics on power mosfets and determine
> how significant the RDS is and what value is better, is lower resistance
> better.  There is no schematic diagram available for this board and it works
> like a camera flash unit.

I would look at the Philips and  Fairchild (sp?) web-sites. I would check it for
you, if my connection was a bit faster. Sorry

BTW, try NTE, at least you (hopefully) may be able to get a pinout and the data
such as Rds[on] and other parameters.

–